Our proximity readers are the result of many years' experience in proximity technology. These readers utilise state-of the art technology allowing flexibility and convenience of use due to the flexibility of programming interface and type of annunciation.
Thanks to these features the application spectrum of our proximity readers is very wide - from personal computers to the specialised control panels. ITV^® Ltd manufactures readers supporting the following interface standards: Wiegand 26-42, RS232, TuchMemory (I-Button). To comply with the various types of control panel readers by ITV^® Ltd have eight variants of annunciation combined with various types of buzzers and LED's controls. HOLD or Card Present function is supported.

Features
Readers of all variants have the high RF and voltage ripple immunity and comply with the CE markings. Readers have wide voltage ranges. All readers, except for the readers with the keypad, are injected with the high quality polyurethane resin and can work in wide temperature ranges at 100% humidity.

Specifications

Housing
ITV^® Ltd Readers are manufactured in various housings: two plastic housings of various colours, vandal resistant stainless steel housing and two kinds of readers with the keypad.
The read range depends on the type of housing and ID tag (see table below, measurements were performed with EM-Marine tags):

Housing	EM04 Card	EM05 Card	EM06 Card
	Read range (mm from the reader surface)
iPR 2	105	160 ... 200	155
iPR 3	35	55...65	55
iPR 6	105	160...200	150
iPR 8	105	160 ... 200	155
iPR 9	105	160 ... 200	155

Ordering information:

iPR -MCIOA

• M - modulation type
• C - Type of housing
  • 2 - Slim housing
  • 3 - Vandal resistant housing
  • 6 - Miniature plastic housing
  • 7 - Reader with keypad in OEM housing
  • 8 - Slim housing
  • 9 - Reader with keypad in slim housing
• IO - interface variant
  • W2 - Wiegand 26
  • W3 - Wiegand 37
  • W4 - Wiegand 42
  • RS - RS232
  • TM - TouchMemory (I Button)
• A - Annunciation variant - 0 ...8

Example:
iPR-A6W47 - proximity reader for ASK modulation in housing No 6, interface - Wiegand 42, annunciation - external control of buzzer, RED and Green LED's.
Although reader type is set during the manufacturing, its parameters can be changed with computerised programmer and "Reader programmer" utility.

ITV^® Ltd manufactures special readers for use with DLK641Plus, DLK642 and DLK642 Lite controls only. These readers are manufactured in three housing types. The read range depends on the type of housing and ID tag (see table below, measurements were performed with EM-Marine tags):

Climatic
Operation temperature -30 °C : +55 °C;
Storage temperature -40 °C : +80 °C;
Humidity 100% relative at +25 °C;

Being as functional as iPR series readers they are extremely cost-effective - about two times cheaper than iPR series readers.
Reader Programmer and Programming Utility

Reader programming utility is most convinient tool for distributor, dealer or reseller. It allows to have the stock of readers of one type, offering customer the type he needs, just reprogramming reader before shipment. Features Simple, self-explanatory interface Reprogramming of all reader operation modes Windows 98, Windows 2000, Windows NT, Windows Millenium OS Octal, Decimal or Hexadecimal card ID display

iPR-2 Reader has the high RF and voltage ripple immunity and comply with the CE marking. Reader has wide voltage range. It is injected with the high quality polyurethane resin and operates in wide temperature range at 100% humidity. Specifications Power Supply Voltage +9...16 VDC Voltage ripple 500mV@12VDC Material ABS plastic Climatic Operation temperature -20 °C ... +60 °C; Storage temperature -30 °C ... +80°C; Humidity 100% relative at +25°C; Dimensions 150 x 45 x 22 mm Read range The read range depends on the ID tag type (see table below, measurements were performed with EM-Marine tags): Read range (mm from the reader surface) EM04 Card EM05 Card EM06 Card 105 160...200 155 EM04 - 1 mm thin card with H4001 EM-Marine chip. EM05 - Clamshell 1.6mm thick card with H4001 EM-Marine chip. EM06 - Standard ISO plastic card with H4001 EM-Marine chip. Ordering information: iPR -MCIOA M - modulation type C - Type of housing 2 - Slim housing 3 - Vandal resistant housing 5 - Reader with keypad 6 - Miniature plastic housing 7 - Reader with keypad in OEM housing 8 - Slim housing 9 - Reader with keypad in slim housing IO - interface variant W2 - Wiegand 26 W3 - Wiegand 37 W4 - Wiegand 42 RS - RS232 A - Annunciation variant - 0 ...8 Example: iPR-A5W48 - proximity reader for ASK modulation in housing No 5, interface - Wiegand 42, annunciation - external control inverts buzzer, RED and Green LED's. Although reader type is set during the manufacturing, it may be changed by the programming with computerised programmer and "Reader Programmer and Programming Utility"

iPR-3 Reader has high RF and voltage ripple immunity and complies with the CE marking. Reader has the wide voltage range. The rugged stainless steel vandal-proof housing has an attractive view. It is injected with high quality polyurethane resin and operates in wide temperature range at 100% humidity. Specifications Power Supply Voltage +9...16 VDC Voltage ripple 500mV@12VDC Material Stainless Steel Climatic Operation temperature -20 °C ... +60 °C; Storage temperature -30 °C ... +80°C; Humidity 100% relative at +25°C; Dimensions 110 x 80 x 15 mm Read range The read range depends on the ID tag type (see table below, measurements were performed with EM-Marine tags): Read range (mm from the reader surface) EM04 Card EM05 Card EM06 Card 35 55...65 55 EM04 - 1 mm thin card with H4001 EM-Marine chip. EM05 - Clamshell 1.6mm thick card with H4001 EM-Marine chip. EM06 - Standard ISO plastic card with H4001 EM-Marine chip. Ordering information: iPR -MCIOA M - modulation type C - Type of housing 2 - Slim housing 3 - Vandal resistant housing 5 - Reader with keypad 6 - Miniature plastic housing 7 - Reader with keypad in OEM housing 8 - Slim housing 9 - Reader with keypad in slim housing IO - interface variant W2 - Wiegand 26 W3 - Wiegand 37 W4 - Wiegand 42 RS - RS232 A - Annunciation variant - 0 ...8 Example: iPR-A5W48 - proximity reader for ASK modulation in housing No 5, interface - Wiegand 42, annunciation - external control inverts buzzer, RED and Green LED's. Although reader type is set during the manufacturing, it may be changed by the programming with computerised programmer and "Reader Programmer and Programming Utility"

iPR-6 Reader has high RF and voltage ripple immunity and complies with the CE marking. Reader has wide voltage range. Small attractive plastic housing fits into any interior seamlessly. It is injected with the high quality polyurethane resin and operates in wide temperature range at 100% humidity. Specifications Power Supply Voltage +9...16 VDC Voltage ripple 500mV@12VDC Material ABS plastic Climatic Operation temperature -20 °C ... +60 °C; Storage temperature -30 °C ... +80°C; Humidity 100% relative at +25°C; Dimensions 105 x 60 x 20 mm Read range The read range depends on the ID tag type (see table below, measurements were performed with EM-Marine tags): Read range (mm from the reader surface) EM04 Card EM05 Card EM06 Card 105 160...200 150 EM04 - 1 mm thin card with H4001 EM-Marine chip. EM05 - Clamshell 1.6mm thick card with H4001 EM-Marine chip. EM06 - Standard ISO plastic card with H4001 EM-Marine chip. Ordering information: iPR -MCIOA M - modulation type C - Type of housing 2 - Slim housing 3 - Vandal resistant housing 5 - Reader with keypad 6 - Miniature plastic housing 7 - Reader with keypad in OEM housing 8 - Slim housing 9 - Reader with keypad in slim housing IO - interface variant W2 - Wiegand 26 W3 - Wiegand 37 W4 - Wiegand 42 RS - RS232 A - Annunciation variant - 0 ...8 Example: iPR-A5W48 - proximity reader for ASK modulation in housing No 5, interface - Wiegand 42, annunciation - external control inverts buzzer, RED and Green LED's. Although reader type is set during the manufacturing, it may be changed by the programming with computerised programmer and "Reader Programmer and Programming Utility"

iPR-8 Modern and elegant styling makes the iPR-8 reader a popular choice for every kind of building. It is fully sealed against the environment with high quality polyurethane resin, and has a wide operating temperature range, making it ideal for outdoor use even under the most extreme conditions. The iPR-8 reader is purposed for use in access control systems designed for RS232, Wiegand 26, Wiegand 37, Wiegand 42, standard Wiegand or TouchMemory interfaces. It has high RF and voltage ripple immunity and complies with the CE marking. The reader operates with amplitude modulation (ASK) proximity cards and tags. Specifications Power Supply Voltage +9...16 VDC Voltage ripple 500mV@12VDC Material ABS plastic Climatic Operation temperature -35 °C ... +60 °C; Storage temperature -40 °C ... +80°C; Humidity 100% relative at +25°C; Dimensions 154 x 45 x 22 mm Read range The read range depends on the ID tag type (see table below, measurements were performed with EM-Marine tags): Read range (mm from the reader surface) EM04 Card EM05 Card EM06 Card 100 150...160 100 EM04 - 1 mm thin card with H4001 EM-Marine chip. EM05 - Clamshell 1.6mm thick card with H4001 EM-Marine chip. EM06 - Standard ISO plastic card with H4001 EM-Marine chip. Ordering information: iPR -MCIOA M - modulation type C - Type of housing 2 - Slim housing 3 - Vandal resistant housing 5 - Reader with keypad 6 - Miniature plastic housing 7 - Reader with keypad in OEM housing 8 - Slim housing 9 - Reader with keypad in slim housing IO - interface variant W2 - Wiegand 26 W3 - Wiegand 37 W4 - Wiegand 42 RS - RS232 A - Annunciation variant - 0 ...8 Example: iPR-A5W48 - proximity reader for ASK modulation in housing No 5, interface - Wiegand 42, annunciation - external control inverts buzzer, RED and Green LED's. Although reader type is set during the manufacturing, it may be changed by the programming with computerised programmer and "Reader Programmer and Programming Utility"

iPR-9 The iPR-9 reader is a reader and touchpad keypad combined in the same rugged housing. It is fully sealed against the environment with high quality polyurethane resin and has a wide operating temperature range, making it ideal for outdoor use even under the most extreme conditions. The iPR-9 reader is purposed for use in access control systems designed for RS232, Wiegand 26, Wiegand 37, Wiegand 42, standard Wiegand. It has high RF and voltage ripple immunity and complies with the CE marking. The reader operates with amplitude modulation (ASK) proximity cards and tags. The built-in keypad allows entering of ID code, by pressing the keys. The code length can be up to 10 digits long in package mode. Specifications Power Supply Voltage +9...16 VDC Voltage ripple 500mV@12VDC Material ABS plastic Climatic Operation temperature -35 °C ... +60 °C; Storage temperature -40 °C ... +80°C; Humidity 100% relative at +25°C; Dimensions 154 x 45 x 22 mm Read range The read range depends on the ID tag type (see table below, measurements were performed with EM-Marine tags): Read range (mm from the reader surface) EM04 Card EM05 Card EM06 Card 100 105...200 100 EM04 - 1 mm thin card with H4001 EM-Marine chip. EM05 - Clamshell 1.6mm thick card with H4001 EM-Marine chip. EM06 - Standard ISO plastic card with H4001 EM-Marine chip. Ordering information: iPR -MCIOA M - modulation type C - Type of housing 2 - Slim housing 3 - Vandal resistant housing 5 - Reader with keypad 6 - Miniature plastic housing 7 - Reader with keypad in OEM housing 8 - Slim housing 9 - Reader with keypad in slim housing IO - interface variant W2 - Wiegand 26 W3 - Wiegand 37 W4 - Wiegand 42 RS - RS232 A - Annunciation variant - 0 ...8 Example: iPR-A5W48 - proximity reader for ASK modulation in housing No 5, interface - Wiegand 42, annunciation - external control inverts buzzer, RED and Green LED's. Although reader type is set during the manufacturing, it may be changed by the programming with computerised programmer and "Reader Programmer and Programming Utility"

iPR-12 Long range reader is an independent unit, designed for use in various access control systems using different interfaces. The reader operates with amplitude modulation (ASK) proximity cards and tags. Its case is injected with high quality polyurethane resin and operates in wide temperature range at 100% humidity. Performance Specification: Programmable Interface RS-232 - RS Wiegand 26/37/42 - W2/W3/W4 Read range - up to 80 cm Type of cards - ASK Power requirements - +20. . . +28 ‚ VDC Current requirements: Average - 0,35 A Peak - 0,9 A Voltage ripple - 0,5 V Case material - ABS plastic Physical dimensions - 312 x 300 x 32 mm Weight - about 2,7 kg Temperature range - -35 . . . +60°C Humidity - 100% (without condensate) Application Features The reader is distinguished by autotune feature, which allows compensating of read range reducing, when the device is installed near metal surface. Avoid mounting two readers closer than 2 meters one from another. Read range of the reader may be affected by radio frequency interference. Ordering information: iPR -MCIOA M - modulation type C - Type of housing 2 - Slim housing 3 - Vandal resistant housing 5 - Reader with keypad 6 - Miniature plastic housing 7 - Reader with keypad in OEM housing 8 - Slim housing 9 - Reader with keypad in slim housing IO - interface variant W2 - Wiegand 26 W3 - Wiegand 37 W4 - Wiegand 42 RS - RS232 A - Annunciation variant - 0 ...8 Example: iPR-A5W48 - proximity reader for ASK modulation in housing No 5, interface - Wiegand 42, annunciation - external control inverts buzzer, RED and Green LED's. Although reader type is set during the manufacturing, it may be changed by the programming with computerised programmer and "Reader Programmer and Programming Utility"

home | about company | system | readers | standalone products | access control panels | software | catalogue | news | support | sales | distributors | downloads | certificates and declarations of conformity | e-mail Copyright © 2004 Integrated Technical Vision LTD.